Cmax Shape completed in foam

Cmax foam shape now ready for covering. The body tent is too small to get full body in one shot. This is the site of the 'old factory' where 001 and 002 were built.

Next stage is to cover the surface in a thin, sealing layer of micro-balloon/resin 'filler' ('glascell 10 in Sicomin epoxy resin - AKA 'Aero-Mick') to protect this fragile shape and provide a hard surface to lay up glass cloth, so that excess resin can be squeegeed off. Surface will be finished with more aero-mick, then prepared for painting.

Cmax Shape completed in foam