Here the Hossack front end it being held up while the first pieces of the frame are fitted between it and the engine. The rear suspension has been disconnected to allow the lump down to ride height un-laden. The engine is supported by four temporary legs with adjustable feet. These allow the lump to be levelled. The bottom of the sump is set level and the ground clearance set to the T-max quoted ride height. As shown the wheel base is exactly as per standard. You can see that there is room to reduce the wheelbase.

The new front end interferes with the standard location on the air-box. You can see is sitting on top of the engine. The radiator is unsupported - the lump of wood fell over.